Features

Stores up to 10 frequency presets in memory
LCD interface for programming and operation
High sensitivity for extended operating range indoors or outdoors
USB port for firmware updates
Compact, rugged machined aluminum housing
Attached battery door
8+ hours battery life with removable LB-50 Li-ion
Dock chargeable with optional CHSIFBR1B

Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFBR1B receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers excellent performance on par with all of Lectrosonics’ IFB products.

The IFBR1B is housed in a rugged aluminum package. A wire belt clip is included and provides a secure mounting on a wide variety of belts, pockets and fabrics. An optional “clamp style” spring-loaded belt clip is also available: the IFBR1BBCSL. The IFBR1B is powered for over 8 hours by a removable, rechargeable LB-50 lithium ion battery. NOTE: The IFBR1B does not ship standard with the single battery charger. To order this unit with a charger, order as a kit: IFBR1B-WITH-CHARGER. The IFBR1B can be dock charged without removing the battery with the optional CHSIFBR1B.

Included Accessories

1 – 3.7 Volt Lithium Ion Battery LB-50 (Part # 40106-1)
1 – Wire belt clip (Part # 27528)
1 – Velcro Strain Relief (Part #VSR1)
1 – Manual

Specifications
Capacity	Specifications Operating Frequencies (MHz): Band A1: 470.100 - 537.575 Band B1: 537.600 - 614.375 Frequency Selection Steps: 25 kHz or 100 kHz, selectable; VHF: 175 kHz Sensitivity: 1 uv (20 dB SINAD) Signal/Noise ratio: 95 dB A-weighted Squelch quieting: 90 dB AM rejection: 50 dB, 10 uV to 100 mV Modulation acceptance: ±20 kHz Spurious rejection: Greater than 70 dB Operating temperature range: -20 to 45 degrees C. Third order intercept: 0 dBm Frequency response: 100 Hz to 10 kHz, (+/-1 dB) Audio output: 1V RMS into 50 ohms minimum Antenna: Headphone cable Min. headphone impedance: 16.0 Ohms Programmable memory: 10 frequencies can be stored as presets Controls: Top Panel: Single knob controls Audio Output Level and Power On Side Panel: Membrane switches with LCD interface for Frequency Selection and Preset function Indicators: Multi-color LED indicator for power on and battery status Battery: LB-50 Li-ion 3.6 V 1000 mAH Battery Life: 8 hours per charge with LB-50 Li-ion battery Current consumption: 120 mA Weight: 3.4 oz (with battery and wire belt clip) Size: 2.8 x 2.4 x 0.8 in. 71.1 x 70.0 x 20.3 mm

Specifications

Capacity

Specifications

Operating Frequencies (MHz): Band A1: 470.100 - 537.575 Band B1: 537.600 - 614.375

Frequency Selection Steps: 25 kHz or 100 kHz, selectable; VHF: 175 kHz

Sensitivity: 1 uv (20 dB SINAD)

Signal/Noise ratio: 95 dB A-weighted Squelch quieting: 90 dB AM rejection: 50 dB, 10 uV to 100 mV

Modulation acceptance: ±20 kHz

Spurious rejection: Greater than 70 dB Operating temperature range: -20 to 45 degrees C.

Third order intercept: 0 dBm Frequency response: 100 Hz to 10 kHz, (+/-1 dB)

Audio output: 1V RMS into 50 ohms minimum

Antenna: Headphone cable Min. headphone impedance: 16.0 Ohms

Programmable memory: 10 frequencies can be stored as presets

Controls: Top Panel: Single knob controls

Audio Output Level and Power On Side Panel: Membrane switches with LCD interface for Frequency Selection and Preset function

Indicators: Multi-color LED indicator for power on and battery status

Battery: LB-50 Li-ion 3.6 V 1000 mAH

Battery Life: 8 hours per charge with LB-50 Li-ion battery

Current consumption: 120 mA

Weight: 3.4 oz (with battery and wire belt clip)

Size: 2.8 x 2.4 x 0.8 in. 71.1 x 70.0 x 20.3 mm