INTELLIGENT DESIGN
The RX-12 is a one stop, 6 slot, receiver solution for your bag or cart. It can receive audio from up to 24 separate transmitters. It contains a 35 MHz tracking front end filter to eliminate interference from unwanted RF, an RF amplifier, and antenna and power distribution. It is the smallest 24 channel radio mic receiver system in the world.
CONNECTIVITY
RX-12 can output 12 channels of analog audio or 24 channels of AES digital audio at -35dB mic level, -10dB consumer level, or 0dB line level on 6 x TA5 connectors. The serial loop USB connector is for connecting to an IFB200, Nova or Nomad to share the ZaxNet remote control feature, and there’s an RF loop through for additional antenna distribution.
CHANNEL COUNT
The RX-12 receives up to TWENTY FOUR channels of audio from TWENTY FOUR separate transmitters when loaded with 6 x MRX414 slot-in receiver modules.
POWERFUL RECEPTION
The RX-12 has an automatic tracking front end filter, so you can receive on any frequency in any block from 20 through 26 (512-698MHz) with impressive range. Here’s how that works – the filter allows signals within the 35 MHz tunable window into the receiver while blocking the interfering high-level signals outside this window. The nerds call this desensing. We let the good stuff in (your radio mic transmitters) and we keep the bad stuff out (walkie talkies, the follow focus, etc.). Think of it like the bouncer outside a nightclub.
RF AMPLIFICATION
The RX-12’s built-in MicPlexer gives you an additional 6dB of RF amplification and both antenna and power distribution for up to 6 Zaxcom MRX214, MRX414 or QRX212 slot-in receiver modules.
The MRX214, MRX414 and QRX212 modules are hot swappable and can be added or removed in any combination at any time, making the RX-12 ideal for rental companies where receiver requirements can change on a daily basis.
ENCRYPTION AND COMPATIBILITY
The RX-12 receives a 100% digital signal that is fully encrypted and is compatible with all Zaxcom modulations and transmitters.
INTUITIVE USER INTERFACE
A bright, full-color LCD displays the menu while a built-in frequency scanner and Auto-Pick software eliminates the guesswork and can coordinate and choose the best frequencies with a push of a button.
ADVANCED FEATURES
Using ZaxNet™, when paired with an IFB200, Nova, Nomad, or Deva 24, the RX-12 can re-freq transmitters to match the RX-12 with a touch of a button. The built-in frequency scanner and Auto-Pick software scans the RF spectrum chooses the best receiver frequencies, and remotely re-freqs transmitters to match. This combo also lets you make quick and easy transmitter gain adjustments.
Specifications | |
Capacity | SPECIFICATIONS Output Analog Audio Output Balanced 0dB @ -20 dBFS (2-channel receiver) Digital Audio Output AESEBU (2 pair per receiver) Audio Connectors 6 x TA5M Receiver RF Connectors 4 SMA, including loop through RF Impedance 50 ohm RF Gain Input / Output 4 dB RF Amp Noise Figure .5 dB RF Amp IP3 +30 dB input RF Filter Band Pass 35 MHz RF Tuning Range 512 – 698 MHz Receiver Modules MRX214 Receivers Per Module 2 QRX212 Receivers Per Module 2 MRX414 Receivers Per Module 4 Receiver Modulation Zaxcom Proprietary Digital Tuning Range 512 – 698 MHz MRX214 Power Consumption 160 ma @ 13 VDC MRX414 Power Consumption 300 ma @ 13 VDC QRX212 Power Consumption 300 ma @ 12 VDC Size 5" x 3" x .8" (L x W x H) Misc Power 8 VDC to 18 VDC (12 VDC nominal @ 100 ma) Power Connector Hirose HR10A-7P-4P LCD Screen TFT daylight readable color LCD Size 2.2" diagonal Size 10.5" x 8" x 2" (L x W X H) Weight 6.2 lbs (loaded w/ 6 x receiver modules) |