If interested in product, please call 1(818) 566-6526 for availability*
Items included:
• Zaxcom ZMT3.5 Phantom Tx
• ZMT3.5 Antenna
• 4GB MicroSD Card
DESIGN MATTERS
Wireless, evolved. Deliver pristine audio quality with our ZMT3-Phantom, a lightweight transmitter ideal for sound professionals.
Zaxcom has taken the next step in design and functionality offered in audio.
Weighing only 2.2oz (62g), the ZMT3-Phantom is constructed in a high strength impact resistant nylon polymer casing with rounded edges and machined metal that’s cool to the touch.
MICROPHONE CONNECTIVITY
The ZMT3-Phantom works with condenser, dynamic or ribbon microphones.
Perfect for boom pole operation, the ZMT3-Phantom is to be positioned at top of the boom pole directly behind the microphone instead of near the bottom. By removing the internal or external cable, operators can eliminate any cable noise that can leak into the audio track.
The ZMT3-Phantom is not intended to be used with lavalier microphones. A balanced 3-pin LEMO provides input connectivity.
ENCRYPTED AUDIO
The ZMT3-Phantom transmits using 100% digital modulation resulting in audio that’s fully encrypted. Digital encryption is the only way to keep all audio transmission private. A digital transmission also provides audio quality far superior to an analog system.
INTERNAL RECORDING
Audio can be recorded internally to a microSD card using the highly reliable lossless MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to dead battery or early card removal.
BETTER WORKFLOW
The ZMT3-Phantom provides a 114dB dynamic range with no limiting or compression distortion. Phantom power is selectable in 12, 24, 32 and 48V. External audio and battery status levels are easily visible for the operator.
ADVANCED FEATURES
Equipped with ZaxNet™, you can remotely change the frequency, pre-amp gain, output power or place the internal recorder in record, playback and stop modes.
| Specifications | |
| Capacity | Transmitter RF Modulation Proprietary Digital Method ZMT3-Phantom .5 RF Frequency Range 512 – 614 MHz ZMT3-Phantom .6 RF Frequency Range 596 – 698 MHz RF Frequency Step 100 KHz RF Bandwidth in ZHD48 Mode 50 KHz RF Bandwidth in ZHD96 Mode 100 KHz RF Bandwidth in XR Mode 200 KHz Channel Separation in ZHD48 Mode as close as 100 KHz (receiver dependent) Channel Separation in ZHD96 Mode as close as 200 KHz Channel Separation in XR Mode 400 KHz Antenna Connector 50 Ω SSMA Female Emission Designator 180 KV2E, 100 KV2E, 50 KV2E FCC Part 74.861 Transmitter Audio Dynamic Range 114 dB Distortion 0.002% Frequency Response Mode 0 Mic Power 12v @ 50mA max Mic Power 48v @ 10mA max Mic Connector 3-Pin Micro LEMO Mic Configuration Balanced Input Range -60 to -30 dBu Mic Impedance 6.8 k Ω ADC Bit-Depth 24 Bits ADC Sampling-Rate 48 kHz Timecode Reader / Generator Timecode output 3-Pin Micro LEMO Clock Accuracy 1.54 PPM (1 Frame Out in 6 Hours) Timecode Type SMPTE Timecode Frame-Rates 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF Internal Recording Media MicroSD Card (Flash Memory) File Format .ZAX / Converts to BWAV or MP3 2.4 GHz ZaxNet Receiver RF Frequency Range 2.403 to 2.475 GHz RF Modulation Digital Spread Spectrum RF Frequency Step 0.001 GHz (1 MHz) RF Bandwidth 1 MHz Channel Separation 2 MHz Sensitivity -96 dBm Physical Weight 2.2 oz / 62 grams with Battery Dimensions (H x W x D) 2.2″ x 1.6″ x .55″ / 55.8mm x 40.6mm x 14mm Display Graphic OLED Power Power Output 25 / 50 / 75 mW – Software Selectable Battery Type NP-50 Battery Life Up to 5 Hours, microphone dependent |