BUBBLEBEE WINDBUBBLE - White

Bubblebee put a lot of thought into these lavalier wind covers.  The frequency through the Windbubble is very transparent, and close to the microphone's natural sound.  The wind reduction is an industry best, thanks to the bubble effect in the construction. Because of this, most wind doesn`t even get inside the Windbubble. The wind that does manage to enter finds its way out again without ruining the frequency response.  Windbubbles stay on the microphone once you`ve put them on, and clothing-noise is reduced remarkably due to the quality of the material used.  Look below to find the correct size for the mic you are using.

BBi - L01

Built for microphones with a diameter of 3.0 mm to 4.0 mm:

• Sanken: COS-11 (without metal windscreen)
• Countryman: B6, B2D, E6
• Sennheiser: MKE 1

BBi - L02

Built for microphones with a diameter of 5.0 mm to 8.0 mm:

• Sanken: COS-11 (with metal windscreen)
• Countryman: B3
• DPA: 4060 (without metal windscreen)
• Sennheiser: MKE 2

BBi - L03

Built for microphones with a diameter of 5.0 mm to 9.0 mm:

• Sanken: COS-11 (with metal windscreen)
• Countryman: EMW
• DPA: 4060 (without metal windscreen)
• Sennheiser: MKE 2 (without metal MZW 2 windshield)

BBi - L04

Built for microphones with a diameter of 8.0 mm to 13.0 mm:

• Sanken: COS-11 (with large metal windscreen)
• Countryman: EMW
• DPA: 4060 (with metal windscreen)
• Sennheiser: ME 4, MKE 2, ME 102, ME 104 (with metal MZW 2 windshield)