DESIGN MATTERS
Deliver pristine audio quality with the TRXCL5 wide-band camera link transmitter for sound professionals in film, television or ENG applications.
Weighing 7.3 oz, it’s constructed from an impact resistant metal casing that’s cool to the touch. A bright OLED display provides easy menu navigation.
CONNECTIVITY
The TRXCL5 sends audio with embedded timecode to camera via a UHF signal to any Zaxcom receiver – QRX200, RX200, QRX235 or MRX/RX-4. It can also send audio and timecode via ZaxNet’s 2.4 GHz signal to an ERX3TCD receiver, or remote control commands to any Zaxcom digital recording wireless transmitter.
A TA5 audio input offers balanced stereo line level or sample rate converting AES. The BNC connector provides timecode in.
New on the CL5 is an RS422 port for direct connection to the Zaxcom GUI Bridge so you can easily setup URX50/100 and remote control your wireless via any device that can access the internet.
ENCRYPTED AUDIO
The TRXCL5 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private.
INTERNAL RECORDING
Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.
BETTER WORKFLOW
The TRXCL5 is designed to limit intermodulation which can occur when multiple transmitters are in close proximity to each other and mix together.
ADVANCED FEATURES
ZaxNet allows you to send or receive timecode, scratch track audio and remote control commands.
MHZ BANDS
In the United States, the TRXCL5 runs in the frequencies and power outputs as follows:
512.0 to 607.9 (up to 100mW)
614.1 to 615.9 (20mW)
653.1 to 662.9 (20mW)
Globally, the TRXCL5 runs between 512.0 – 698.0 MHz
| Specifications | |
| Capacity | Transmitter RF Modulation - Proprietary Digital Method TRXCL5 US RF Freq Ranges 512.0 to 607.9 MHz 614.1 to 615.9 MHz 653.1 to 662.9 MHz Global RF Freq Range - 512 to 698 MHz RF Frequency Step - 100 KHz RF Bandwidth in ZHD Mode - 50 KHz RF Bandwidth - 200 KHz Channel Separation in XR Mode - 400 KHz Antenna Connector - 50 Ω SMA Female Emission Designator - 180 KV2E FCC Part - 74.861 Transmitter Audio Dynamic Range 114 dB Distortion - 0.002% Frequency Response Mode 0 is 20 Hz to 16 kHz / T & M Mode is 0.2 Hz to 16 kHz System Group Delay - 3.5 ms Audio input connector - TA5 male Analog Input Range: -10 to +4 dBu Analog input type - balanced line level Audio input Impedance - 4.7 k Ω ADC Bit-Depth - 24 Bits ADC Sampling-Rate - 48 kHz AES input - Balanced with sample rate conversion Sample rate range - 32 Khz to 96 Khz Timecode Reader / Generator Clock Accuracy 1.54 PPM (1 Frame Out in 6 Hours) Timecode Type - SMPTE Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF Internal Recording Media MicroSD Card (Flash Memory) File Format - .ZAX Recording Time - 96 Hours (16 GB Card) 2.4 GHz ZaxNet Transmitter RF Frequency Range 2.403 to 2.475 GHz RF Modulation - Digital Spread Spectrum RF Frequency Step - 0.001 GHz (1 MHz) RF Bandwidth - 1 MHz Channel Separation Channel Separation - 2 MHz Sensitivity: -96 dBm RF power output - 100 mW max Physical / Power Weight - 7.3 oz Dimensions (H x W x D) - 1”x 3.55” x 3.23” Display - Graphic OLED Power Output - 25 / 50 / 100 mW – Software Selectable Power consumption - 2.13 watts *Power measured pre-output band pass filter |
Related Products
Zaxcom - RX200 Wideband 2 Channel Receiver
DESIGN MATTERSThe RX200 is a 200 MHz wide-band, compact, battery powered ENG receiver. It has a tuna..
$1,995.00
Zaxcom - RX-4 - MRX Module Interface
The RX-4 is an interface to convert Zaxcom’s MRX214 and MRX414 receiver modules into stand-alone rec..
$795.00