• Lectrosonics - SSM Digital Hybrid Wireless® Micro Transmitter

Features

  • Tunable across 3 frequency blocks 
  • Digital Hybrid Wireless® audio for compandor-free digital quality
  • Selectable 25 or 50 mW RF power
  • Compatibility modes for use with analog receivers
  • 25 or 100 kHz tuning steps 
  • Wide range input gain control in 1 dB steps
  • Quick change Lithium-ion rechargeable battery
  • Audio coupled remote control

The SSM is ideal in theatrical or any other production where concealment in costuming is required. In spite of its tiny size, the transmitter offers an extensive feature set and performance on par with all of the Digital Hybrid Wireless® models.

Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations.

The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. Accurate LED indications on the keypad allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion. The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio, yet provide protection against input overload.

Along with providing peerless audio quality with wide frequency response and dynamic range in Nu Hybrid mode, the technology used in the SSM includes compatibility modes for Lectrosonics Mode 3 and IFB receivers.

Included Accessories

  • 1 - 26995 Belt Clip
  • 1 - 27079 ANTENNA UP BELT CLIP 
  • 1 - 35939 Pouch 
  • 1 - 40106-1 Lithium Batteries 
  • 1 - 40102 Battery Charger 
  • 3 - P1311 USB Port Plug 

Specifications

Operating Frequencies: SSM: Band A1: 470.100 - 537.575 Band B1: 537.600 - 607.950

Frequency Selection Steps: Selectable; 100 kHz or 25 kHz

RF Power output: SSM/E01/E01-B2/X: Selectable; 25 or 50 mW SSM/E02: 10 mW SSM/E06: 50 or 100 mW EIRP

Compatibility Modes: US: Nu Hybrid, Mode 3, IFB E01: Digital Hybrid, Mode 3, IFB E01-B2: Digital Hybrid, Mode 3, IFB E02: Digital Hybrid, Mode 3, IFB E06: 100 Series, 200 Series, Mode 3, Digital Hybrid, IFB, Mode 6, Mode 7 SSM/X: 100 Series, 200 Series, Mode 3, Digital Hybrid, IFB, Mode 6, Mode 7 Pilot tone: 25 to 32 kHz; 3.5 kHz deviation (Nu Hybrid mode); ± 50 kHz max. (Digital Hybrid mode)

Frequency Stability: ± 0.002%

Operating temp. range: Celsius: -20° - 40° Farenheit: -5° - 104°

Spurious radiation: SSM: Compliant with ETSI EN 300 422-1 v1.4.2 SSM-941/E01/E02/E06/X: 60 dB below carrier

Equivalent input noise: –120 dBV (A-weighted)

Input level: Nominal 2 mV to 300 mV, before limiting. Greater than 1V maximum, with limiting.

Input impedance: • Mic: 300 or 4.5 k ohm; selectable • Line: greater than 100 k ohm Input limiter: DSP controlled, dual envelope “soft” limiter with greater than 30 dB range

Gain control range: 44 dB; digital control

Modulation indicators: Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation

Audio Performance (Digital Hybrid and Nu Hybrid)

Frequency Response: 70 Hz to 20 kHz (+/-1dB)

Low frequency roll-off: –12 dB/octave; 70 Hz THD: 0.2% (typical)

Controls: Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls

Audio Input Jack: LEMO 00 Series 3-pin

Antenna: Galvanized steel, flexible wire

Battery: Lithium-ion 3.6 V 1000 mAH LB50 battery pack

Battery Life: 6 hours per charge

Weight: 2.3 ounces (65.2 grams) including lithium battery pack

Dimensions (housing): 2.3 x 1.5 x .56 in. (58.4 x 38 x 14.2 mm)

Emission Designator: SSM: 110KF3E SSM/E01/E01-B2/E02/E06/X: 180KF3E

Specifications
Capacity Specifications

Operating Frequencies: SSM: Band A1: 470.100 - 537.575 Band B1: 537.600 - 607.950

Frequency Selection Steps: Selectable; 100 kHz or 25 kHz

RF Power output: SSM/E01/E01-B2/X: Selectable; 25 or 50 mW SSM/E02: 10 mW SSM/E06: 50 or 100 mW EIRP

Compatibility Modes: US: Nu Hybrid, Mode 3, IFB E01: Digital Hybrid, Mode 3, IFB E01-B2: Digital Hybrid, Mode 3, IFB E02: Digital Hybrid, Mode 3, IFB E06: 100 Series, 200 Series, Mode 3, Digital Hybrid, IFB, Mode 6, Mode 7 SSM/X: 100 Series, 200 Series, Mode 3, Digital Hybrid, IFB, Mode 6, Mode 7 Pilot tone: 25 to 32 kHz; 3.5 kHz deviation (Nu Hybrid mode); ± 50 kHz max. (Digital Hybrid mode)

Frequency Stability: ± 0.002%

Operating temp. range: Celsius: -20° - 40° Farenheit: -5° - 104°

Spurious radiation: SSM: Compliant with ETSI EN 300 422-1 v1.4.2 SSM-941/E01/E02/E06/X: 60 dB below carrier

Equivalent input noise: –120 dBV (A-weighted)

Input level: Nominal 2 mV to 300 mV, before limiting. Greater than 1V maximum, with limiting.

Input impedance: • Mic: 300 or 4.5 k ohm; selectable • Line: greater than 100 k ohm Input limiter: DSP controlled, dual envelope “soft” limiter with greater than 30 dB range

Gain control range: 44 dB; digital control

Modulation indicators: Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation

Audio Performance (Digital Hybrid and Nu Hybrid)

Frequency Response: 70 Hz to 20 kHz (+/-1dB)

Low frequency roll-off: –12 dB/octave; 70 Hz THD: 0.2% (typical)

Controls: Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls

Audio Input Jack: LEMO 00 Series 3-pin

Antenna: Galvanized steel, flexible wire

Battery: Lithium-ion 3.6 V 1000 mAH LB50 battery pack

Battery Life: 6 hours per charge

Weight: 2.3 ounces (65.2 grams) including lithium battery pack

Dimensions (housing): 2.3 x 1.5 x .56 in. (58.4 x 38 x 14.2 mm)

Emission Designator: SSM: 110KF3E SSM/E01/E01-B2/E02/E06/X: 180KF3E

Lectrosonics - SSM Digital Hybrid Wireless® Micro Transmitter

  • $1,704.00


Available Options


Related Products

Lectrosonics - SMV Digital Hybrid Wireless® Belt Pack Transmitter

Lectrosonics - SMV Digital Hybrid Wireless® Belt Pack Transmitter

FeaturesDigital Hybrid Wireless™ Technology*(U.S. Patent #7,225,135)Variable, selectable power ..

$1,627.00

Lectrosonics - SMQV Digital Hybrid Wireless® Belt-Pack Transmitter

Lectrosonics - SMQV Digital Hybrid Wireless® Belt-Pack Transmitter

FeaturesDigital Hybrid Wireless™ Technology*(U.S. Patent #7,225,135)Variable, selectable power ..

$1,714.00

Lectrosonics - SMDWB Digital Hybrid Wireless® Wideband Transmitter

Lectrosonics - SMDWB Digital Hybrid Wireless® Wideband Transmitter

FeaturesUltra-lightweight, corrosion resistant housingWater resistant seals for use in damp environm..

$1,869.00

Lectrosonics - SMWB Digital Hybrid Wireless® Wideband Transmitter

Lectrosonics - SMWB Digital Hybrid Wireless® Wideband Transmitter

FeaturesUltra-lightweight, corrosion resistant housingWater resistant seals for use in damp environm..

$1,704.00

Lectrosonics - SRc Dual-Channel Slot Mount ENG Receivers

Lectrosonics - SRc Dual-Channel Slot Mount ENG Receivers

FeaturesFits camera “slots,” Lectrosonics Duopack adapter and Octopack multicoupler, and operates st..

$2,755.00

Lectrosonics - UCR411A Digital Hybrid Wireless® Compact Receiver

Lectrosonics - UCR411A Digital Hybrid Wireless® Compact Receiver

ITEM IN LIMITED QUANTITIESFeaturesDigital Hybrid Wireless® (U.S. Patent #7,225,135)SmartSquelch™Smar..

$2,059.00

Tags: Lectro, SSM