• Lectrosonics - Venue 2 Modular Receiver

Features

  • Six-channel modular configuration
  • Ratio or Antenna Phase diversity reception
  • 3-block tuning for up to 76 MHz and 3072 synthesized UHF frequencies per receiver module
  • IR port for quick transmitter setup
  • DSP emulation modes for compatibility with analog wireless systems in addition to the Digital Hybrid mode
  • iQ™ dynamic tracking filters for enhanced RF performance
  • Wireless Designer™ setup and control software included
  • Talkback function with select transmitters
  • Ethernet, USB and RS-232 computer interface ports

The Venue 2 Receiver is a modular solution that effectively deals with a congested RF spectrum with a variety of options that allows a system configuration to be idealized for a particular installation or application.

The receiver is comprised of several components:

  • The master rack mount host assembly
  • Up to six receiver modules
  • Built-in antenna multicoupler with loop-thru output
  • Software for setup and control

Flexibility is the core concept of the design. The receiver modules can be operated separately, each with switched diversity reception for a total of six audio channels, or operated in pairs for more robust diversity reception with one audio channel per module pair. Combinations can also be used for special applications where some modules operate independently and others are paired.

The receiver modules are easy to change with no tools required. The wideband multicoupler allows the use of any frequency module in any position, except when modules are paired for ratio diversity reception.

A major benefit of the design is the inclusion of a high quality antenna multicoupler. The multicoupler is actually a dual 1 in, 7 out splitter with six outputs for the receiver modules and an additional output as a “loop thru” for another Venue receiver. This allows multiple Venue receivers to operate from a single pair of antennas. Phantom power for remote antenna amplifiers is available from the multicoupler antenna inputs via menu selection.

Digital Hybrid Wireless®

Digital Hybrid Wireless® is a revolutionary design that combines digital audio with an analog FM radio link to provide both outstanding audio quality and exemplary, noise-free RF performance. 

Using a patented algorithm to encode 24-bit digital audio information in the transmitter into an analog format, the encoded signal is then transmitted over an analog FM wireless link.

At the receiver, the signal is then decoded to restore the original digital audio. This process eliminates compandor artifacts and produces an audio frequency response flat to 20 kHz.

Included Accessories

  • 1 - USB cable (Part #21713)
  • 1 - Power Cord (Part #21499)
  • 1 - Power Supply/AC Adapter (Part #DCR15/4AU)
  • 1 - Software CD - Wireless Designer (Part #WDDISK)
  • 1 - Cable (Part #MC65)
  • 1 - Manual 
Specifications
Capacity Operating Frequencies - Host Mainframe VRM2WBL: Tunes to bands A1, B1, B2, C1 VRM2WBM: Tunes to bands B1, B2, C1, C2 Operating Frequencies - VRT2 Module Band A1: 470.100 - 537.575 MHz (blocks 470, 19, 20) Band B1: 537.600 - 614.375 MHz (blocks 21, 22, 23) Band B2: 563.200 - 639.900 MHz (blocks 22, 23, 24) Band C1: 614.400 - 691.175 MHz (blocks 24, 25, 26) Band C2: 640.000 - 716.700 MHz (blocks 25, 26, 27)
Frequency selection: Up to 3072 frequencies
Frequency selection steps: Selectable; 100 kHz or 25 kHz Digital latency: • 1.5 mS (receiver only - hybrid mode) • 3.0 mS (receiver and transmitter in hybrid mode) • 3.0 mS (receiver only - analog compatibility mode) The 3.0 mS latency in analog compatibility mode time aligns the audio from analog and hybrid transmitters when they are used together in a Venue system.
Wideband Multicoupler: Built in antenna multicoupler covers a 230 MHz range.
Pilot tone: 25 to 32 kHz; 5kHz deviation; unique pilot tone frequency for each selected carrier frequency (Hybrid mode)
Deviation: ± 75 kHz (max) (Hybrid mode)
Receiver Type: Triple conversion superheterodyne
Frequency Stability: ±0.001%
Multicoupler Bandwidth: 470 - 691 MHz or 537 - 768 MHz
Front End Bandwidth: • iQ filter wide mode: 15 MHz • iQ filter narrow mode:10 MHz
Sensitivity (20 dB Sinad): 0.9 uV AM Rejection: >60 dB, 2 uV to 1 Volt
Image and Spurious Rejection: 85 dB Third Order Intercept: • iQ filter wide mode: +5 dBm • iQ filter narrow mode:+12 dBm
Diversity Methods: • Antenna Combining Phase switching • Opti-blendTM ratio diversity
FM Detector: Digital pulse counting detector @ 300 kHz
Audio Performance (overall system):
Frequency Response: 32 Hz to 20 kHz (+/-1dB), overall system (400 Series mode)
THD: 0.2% (typical) (400 Series mode)
Input Dynamic Range: 125 dB (with full transmitter limiting)
Audio Output Level: -35 dBu to +8 dBu, in 1 dB increments LCD: High resolution graphical display
Power Requirements: 10 VDC/2A to 18 VDC/1.2A
Weight: 4.4 lbs. (1984 grams) with six modules
Dimensions: 19”W x 1.75”H x 7.75”D (panel to rear jacks) (48.26 cm x 4.45 cm x 19.67 cm)

Lectrosonics - Venue 2 Modular Receiver

  • $3,148.00


Available Options


Related Products

Lectrosonics - VRT2 Module

Lectrosonics - VRT2 Module

Up to six VRT2 modules may be installed per each 1RU Venue 2 receiver frame. Each module s..

$823.00

Tags: Lectro, VRM2WBL